English 
İspanyolca
Fransızca
Portekizce
Русский
Türkçe
MTL100 IoT Terminal
MTL100 series IoT controller units can connect to sensors both wired and wireless. The internet connection can be established via LAN, WiFi or GPRS. MQTT protocol is available.
Four wired and thirty wireless sensor nodes can be connected and controlled.
It has 2x16 LCD display, where sensor data, date time information, sensor name and sensor’s ID numbers can be displayed on it.
Sensors and connection configurations are made via 2 x 16 keypad that is on the device. A free message can also be sent.
It has a 10/100 Mbps LAN port to connect to a LAN for transferring sensors’ data to a server with TCP/IP.
Data transferring speed can be configured.
A configuration SW via RS 232 or TCP/ IP is available. The IP address, DNS, subnet mask, default gateway, data sending period, TCP port, telnet port, server address, name of sensor, type of sensor, threshold and time/date can be configured with this SW.
The device can remotely be reset.
It works with an external 9-30VDC / 2 A power supply. There are two LEDs for power, network status and GSM status.
It has a buzzer for audible warning when a threshold is exceeded.
Maximum cable length is 20 m between wired sensor nodes and the device.
Maximum cable length is 30m between a network switch and the device.
MTL100 can be installed to a wall or can be used on a desktop.
FEATURES:
o Operating temperatures: 0°C~ +45°C
o Wireless transceiver frequency: 2.4GHz
o Open air communication distance: 250m
o Dimensions: 110 x 76 x 27mm
o Weight:180 gram (W/O battery)
o Sensor type: 1-wire (4 pieces)
o RS485 & RS232
o 2 x Digital input
o WiFi (Optional)
o Mesh (Optional)
o GPRS (Optional)
o GPS (Optional)
.jpg){kind=tracking}
MT548 VEHICLE TRACKER (BASIC)
High sensitivity satellite navigation
Communication via Quad band GSM
SMS, GPRS, TCP/IP, UDP
Fully customable behavior
Autonomous operation
Car security and recovery
3D G sensor for crushing and towing alarm
Drivers behaviors logbook / history
Territory management / Geofencing
Remote administration & firmware update
Fully approved (CE, E-Mark)
Internal antennas (Optional)
Back-up battery (Optional)
GSM CORE
SIM800C Quad Module
850/900/1800/1900MHz
GPRS Class 10
TCP-IP or UDP
GPS CORE
SIM28 22 Channel GPS receiver
High sensitivity MTK chipset
Protocols: NMEA, PMTK
Support: AGPS, SBAS, EASY, EPO, DGPS
Position Accuracy: 2.5m CEP
TTFF hot start: < 1 s
TTFF cold start: 31 s
Tracking sensitivity: -165dBm
PROCESSOR CORE
ARM9
Memory: 1Mb RAM, 1Mb Flash
ELECTRICAL CHARACTERISTICS
Power: +6V to +30VDC
MOTION SENSOR
3 axis motion sensor
INTERFACES
2 x I/O
1 x DO, 1 x DI
RS232
SIM card reader
TEMPERATURE RANGE
Operating: -20°C to +60°C
PHYSICAL CHARACTERISTICS
Dimensions (LxWxH): 86 x 60 x 25,3mm
Weight: 90g
ACCESSORIES
RFID Reader
Canbus interface
Panic button
Immobilizer
ST900 PORTABLE TRACKER
High sensitivity satellite navigation
Communication via Quad band GSM
SMS, GPRS, TCP/IP, UDP
Fully customable behavior
Autonomous operation
Human & parcel security and recovery
3D G sensor
3 programmable buttons
Territory management / Geofencing
Remote administration & firmware update
CE approved
Internal antennas
Battery
GSM CORE
SIM800C Quad Module
850/900/1800/1900MHz
GPRS Class 10
TCP-IP or UDP
GPS & GLONASS CORE
SIM33ELA 33 Channel GNSS receiver
High sensitivity MTK chipset
Protocols: NMEA, PMTK
Support: AGPS, SBAS, EASY, EPO, DGPS
Position Accuracy: 2.5m CEP
TTFF hot start: < 1 s
TTFF cold start: 28 s
Tracking sensitivity: -165dBm
PROCESSOR CORE
ARM9
Memory: 1Mb RAM, 1Mb Flash
ELECTRICAL CHARACTERISTICS
Power: +5 VDC
MOTION SENSOR
3 axis motion sensor
INTERFACES
2 x I/O
1 x DO, 1 x DI
TTL
SIM card reader
TEMPERATURE RANGE
Operating: -10°C to +45°C
PHYSICAL CHARACTERISTICS
Dimensions (LxWxH): 55 x 72 x 19mm
Weight: 45g
ACCESSORIES
Charger
Vehicle installation kit
.png){kind=tracking}
MT865 VEHICLE TRACKER (PRO)
High sensitivity satellite navigation
Communication via Quad band GSM
SMS, GPRS, TCP/IP, UDP
Fully customizable behavior
Autonomous operation
Car security and recovery
3D G sensor for crushing and towing alarm
Drivers behaviors logbook / history
Territory management / Geofencing
Remote administration & firmware update
CE approved
Internal antennas (Optional)
GSM CORE
SIM800C Quad Module
850/900/1800/1900MHz
GPRS Class 10
TCP-IP or UDP
GPS CORE
SIM28 22 Channel GPS receiver
High sensitivity MTK chipset
Protocols: NMEA, PMTK
Support: AGPS, SBAS, EASY, EPO, DGPS
Position Accuracy: 2.5m CEP
TTFF hot start: < 1 s
TTFF cold start: 31 s
Tracking sensitivity: -165dBm
PROCESSOR CORE
MX150
Ext. Memory: 16Mb
ELECTRICAL CHARACTERISTICS
Power: +6V to +30VDC
MOTION SENSOR
3 axis motion sensor
INTERFACES
8 x I/O
3 x DI, 2 x DO, 1 x AI, 1 x 1W, 1 x PC
RS232
Mike
SIM card reader
TEMPERATURE RANGE
Operating: -20°C to +60°C
PHYSICAL CHARACTERISTICS
Dimensions (LxWxH): 85 x 60 x 33mm
Weight: 90g
ACCESSORIES
RFID Reader
JPEG Camera
Canbus interface
Panic button
ImmobilizerBack-up battery (Optional)
ST900WP WATERPROOF TRACKER
High sensitivity satellite navigation
Communication via Quad band GSM
SMS, GPRS, TCP/IP, UDP
Fully customable behavior
IP65 enclosure
IP65 power socket (Optional)
Boat & motorcycle security and recovery
3D G sensor for crushing and towing alarm
Drivers behaviors logbook / history
Territory management / Geofencing
Remote administration & firmware update
CE approved
Internal antennas
Back-up battery (Optional)
GSM CORE
SIM800C Quad Module
850/900/1800/1900MHz
GPRS Class 10
TCP-IP or UDP
GPS & GLONASS CORE
SIM33ELA 33 Channel GNSS receiver
High sensitivity MTK chipset
Protocols: NMEA, PMTK
Support: AGPS, SBAS, EASY, EPO, DGPS
Position Accuracy: 2.5m CEP
TTFF hot start: < 1 s
TTFF cold start: 28 s
Tracking sensitivity: -165dBm
PROCESSOR CORE
ARM9
Memory: 1Mb RAM, 1Mb Flash
ELECTRICAL CHARACTERISTICS
Power: +6V to +30VDC
MOTION SENSOR
3 axis motion sensor
INTERFACES
2 x I/O
1 x DO, 1 x DI
RS232
SIM card reader
TEMPERATURE RANGE
Operating: -20°C to +60°C
PHYSICAL CHARACTERISTICS
Dimensions (LxWxH): 64 x 68 x 35mm
Weight: 90g
ACCESSORIES
RFID Reader
Canbus interface
Panic button
Immobilizer
FMS232 CANBUS INTERFACE
Compatible with J1939 FMS vehicles as follow;
Daimler
Man
Scania
Daf
Iveco
Volvo/Renault
Available data from some vehicles
Speed
RPM
Total fuel consumption
Temperature of cooling water
Fuel level
Fuel consumption
Total working time of engine
Total travel distance
Tachograph info
Ambient temperature
Break air pressure
Location of axial
Weight of axial
Distance to the service
Total weight of the vehicle
PTO
TECHNICAL FEATURES
Micro controller
2x2 socket
2x3 socket
Power LED
CanTx LED
CanRx LED
64Kb Flash
ELECTRICAL CHARECTERISTICS
Voltage: +9V to +36VDC
Current : 40mA @ 12VDC
MOTION SENSOR
3 axis motion sensor (Optional)
INTERFACES
RS232
Canbus
K-Line
TEMPERATURE RANGE
Operating: -20°C to +60°C
PHISICAL CHARACTERISTICS
Dimensions (LxWxH): 860x 60 x 30mm
Weight: 40g
BPR301 MIFARE RFID READER
BPR301 is a powerful proximity reader featuring small dimensions and a read range of up to 5 cm.
The reader will run from any voltage from 9 to 15 VDC and making it particularly suited to access control, car parking and through-wall reading applications.
BPR301W has Wiegand port. BPR301R has RS-232 port.
BPR1301R is connected to MT865 for driver identification.
BPR301 is compatible with all standard access control systems and is suitable for access control systems, auto-parks, time attendance, secure access, payment systems etc.
It is manufactured as Mifare data format and it is possible to design them for EM Marin data format as BPR201 series reader.
